Siyakwamukela kumawebhusayithi ethu!

I-double face SM-10

Incazelo emfushane:

★Indawo yokushisa ipuleti ngokugaya, ububanzi bepuleti elishisayo elingu-600mm, ingqikithi yepuleti lokushisa elingu-12 nokupholisa amamitha angu-4.
Ipuleti yokushisa enomkhiqizo webhodi leziqukathi, ngokuhambisana namazinga kazwelonke omkhumbi wengcindezi yekilasi, nesitifiketi somkhumbi wokucindezela nesitifiketi sokuhlola.


Imininingwane Yomkhiqizo

Omaka bomkhiqizo

I-SM-10 DOUBLE FACEER

Amapharamitha

Ofuna ukukwazi wukuthi sisebenza kanzima.

IMIKHIQIZO YOMKHIQIZO

I-double face SM-10

※ Isici sesakhiwo

★Ipuleti elishisayo elinesakhiwo esinamandla adonsela phansi. Roll thatha i-pneumatic lifting.

★Ipuleti yokushisa yokudlulisa ukushisa kwepayipi yokulawula izinga lokushisa ngaphansi kwengxenye yesine, ngesibonisi sokushisa.

★kukotini sebenzisa ibhande likakotini elinesilinda S elinesisetshenziswa esiqinisayo.

★ibhande eliphansi lithatha i-pneumatic tensioning.

★Irola yedrayivu ehlanganiswe nerabha engagugi enamathiselwe, ibonise isakhiwo se-herringbone, Ngephezulu, qinisekisa ukuphuma kwamakhadibhodi abushelelezi.

★Injini yokushayela eyinhloko ye-frequency conversion motor, i-torque enesivinini esiphansi, ububanzi besivinini, ethembekile, futhi kulula ukuyigcina.

★ipuleti elishisayo langaphakathi lesakhiwo sokuhlukanisa,ukugeleza okumise okuka-s kwesitimu,Isimusi, umsebenzi wokuhlukanisa amanzi kuthuthukisa kakhulu ukusetshenziswa kwesitimu.

※ Imingcele yezobuchwepheshe

1. Imfuneko yokushisa: 160-200 ℃ ingcindezi yesitimu: 0.8-1.3Mpa

2. ingcindezi yomthombo womoya:0.6—0.9Mpa

3. Ukupholisa ama-stereotypes ubude:4m Ubuningi bepuleti Lokushisa: izingcezu eziyi-12

4. ingcindezi yesistimu ye-hydraulic: 6---8Mpa

※ Imingcele yobubanzi be-roller

 

1. Ububanzi be-rubber yerabha yedrayivu engaphezulu: ¢475mm ububanzi obuphansi berabha yerabha yedrayivu: ¢350mm Gqoka i-rubber Outsourcing

2. Umlandeli wangaphambili onobubanzi be-roller: ¢176mm ibhande lokusetha ibhande elishayelwa ububanzi berola:¢176mm

3. I-Platen roller:¢85mm Ukusetha ububanzi berola:¢86mm

4. Ibhande elingaphezulu lokudonsa ibhande ububanzi: ¢155mm upper roll ububanzi nge detuning: ¢124mm

5. Ububanzi berola yebhande eliphansi:¢130mm Iphathiswe ibhande eliphansi lobubanzi bebhande:¢130mm

Qaphela: Wonke ama-roller surface ngemva kokugaya ane-chrome eqinile.

※ Powered motor nemingcele

1, Main drive motor amandla:22KW 380V 50Hz Continuous (S1) ukusebenza standard

※ Izingxenye ezithengwa kakhulu, izinto zokusetshenziswa kanye nemvelaphi

I-double face SM-10


  • Okwedlule:
  • Olandelayo:

  • Bhala umyalezo wakho lapha futhi usithumelele wona