Double facer SM-10
SM-10 DOUBLE FACER
Parameters
What you want to know is that we work hard.
PRODUCT SPECIFICATIONS
※Structural feature
★Hot plate with intensive gravitational roll structure. Roll adopt pneumatic lifting.
★Heating plate heat transfer pipe temperature control sub-four-segment, with a temperature display.
★on cotton use two-cylinder S type cotton belt with the tensioning device.
★lower belt adopt pneumatic tensioning.
★Drive roller coated with attached wear-resistant rubber ，showed a herringbone structure，With a high, ensure smooth cardboard output。
★Main drive motor for frequency conversion motor，low-speed torque，wide speed range ,reliable, and easy maintenance.
★hot plate internal for partition isolation structure,s-shaped flow of steam，Steam, water separation function significantly improves the utilization of steam。
※Technical parameters
1. temperature requirement：160—200℃ steam pressure：0.8-1.3Mpa
2. air source pressure：0.6—0.9Mpa
3. Cooling stereotypes length：4m Heating plate quantity：12 pieces
4. hydraulic system pressure：6---8Mpa
※Roller diameter parameters
1. upper drive rubber roller diameter：￠475mm lower drive rubber roller diameter：￠350mm Wear rubber Outsourcing
2. Former follower with roller diameter：￠176mm back setting belt driven roller diameter：￠176mm
3. Platen roller：￠85mm Setting roller diameter：￠86mm
4. upper belt tension roller diameter：￠155mm upper roll diameter with detuning：￠124mm
5. Lower belt tension roller diameter：￠130mm Entrusted with the roll diameter lower belt：￠130mm
Note: All the roller surface after grinding are hard chrome plated。
※Powered motor parameters
1、Main drive motor power：22KW 380V 50Hz Continuous (S1) working standard
※Mainly purchased parts, raw materials and origin
